The Ubertooth One is an open source 2.4 GHz wireless development platform suitable for Bluetooth experimentation. In accordance with the powerful LPC175x ARM Cortex-M3 microcontroller with full-speed USB 2.0, the Ubertooth One is an effective way to develop custom Class 1 comparable Bluetooth devices. All the board is only****two and a half inches long with a USB-A connector at one end and an RP-SMA connector on the other.
One thing that sets the Ubertooth aside from other Bluetooth development platforms is that it is in a position to not only sending and receiving 2.4 GHz signals, but can also operate in monitor mode, monitoring Bluetooth traffic in real-time. This operating mode has been present in low-cost WiFi modules for years and has found myriad uses in research, development and security auditing but no such solution existed for the Bluetooth standard until now. Also, because it is a fully open-source platform (software and hardware), the schematics and code are readily to be had for your entire hacking needs.
Dimensions: 61.75mm x 19mm (2.43″ x 0.75″)
2.4 GHz Transmit and Receive. Six Indicator LEDs
Transmit power and receive sensitivity comparable to a Class 1 Bluetooth device.
Standard Cortex Debug Connector (10-pin 50-mil JTAG) In-System Programming (ISP) Serial Connector
Expansion connector intended for inter-Ubertooth communication or other future uses.
2.4 GHz Duck Antenna Included