The Elechouse Proxmark3 Dev Kit 2 (RDV2) is the most contemporary addition to the Proxmark family. This redesign offers increased portability through smaller board dimensions and enhance for an on-board battery (sold one by one). The main board measures a mere 82 mm x 38 mm. Unfortunately, this version is not open source these days but a schematic for its predecessor, the RDV1 is available online.
Inside the box you can find an Elechouse Proxmark3, PCB Sandwich Enclosure Assembly, 125kHz LF Antenna, 13.56Mhz HF Antenna, MMCX antenna cables, Power Cable, and Tag Bundle. The specific tags included in the bundle may also be found under the Specifications tab. The Proxmark client software and firmware are open source and available for download. The RDV2 ships preprogrammed running Asper’s binary builds.
The Proxmark is the only SDR targeting NFC and RFID frequencies that is capable of both transmitting and receiving even as meeting the timing requirements of most proximity protocols. The Proxmark also provides full keep watch over over the radio layer along with software enhance for several higher-level protocols (ex. Mifare).
The LF Antenna enables communication with tags that operate at 125kHz and 134kHz (including HID Prox II, HITAG, and EM4100). The HF Antenna enables communication with tags operating at 13.56Mhz (including Mifare Classic/Ultralight, and iClass).
WARNING: The Proxmark3 is a research and development tool. It has not been evaluated for compliance with regulations governing transmission and reception of radio signals. You are responsible for the usage of this product in compliance with your local laws.
In The Box: Elechouse Proxmark3, Enclosure Assembly, LF Antenna, HF Antenna, MMCX antenna cables, Power Cable, Tag Bundle.
Tag Bundle: Mifare 1 S50, Mifare Ultralight, Mifare UID (Chinese Magic Card), HID Tag, T5577, and EM4X tag
LF Antenna: Operates at 125kHz and 134kHz (including HID Prox II, HITAG, and EM4100).
HF Antenna: Operates at 13.56Mhz (including Mifare Classic/Ultralight).